Single girder overhead crane is one of the best seller crane of manufacturer. This crane has a excellent performance almost on any application, even on low headroom factories. The under running single girder equipment beyond the limit of ceiling space, and make low headroom transporting possible.
As the hot sale product, it accepted by customers because the following advantages. Firstly, overhead device has maximum strength and rigidity, it can service your factory lifting task for a very long time. Besides, the smallest dead weight weigh produces minimum wheel pressure. All benefits crane brings makes it the most cost- save choice of your building project.
According to the difference of hoist trolley, working occasions, explosive proof function and flame proof ability, our firm has six types of single girder overhead cranes for sale. Look the the parameters and pictures below to choice the crane you need.
Features of overhead crane structure
As the most common use lifting equipment in the market, overhead crane has its own structure feature. Overhead main beam consists of three types, and it includes on track box shape main beam, partial rail box form, partial rail empty stomach box and single girder partial rail box form.
Rail way of hoist trolley of on track box shape main beam is fixed on the middle of main beam by orbital welding clamp. Except welding those main beam large plate, overhead crane beam structure of this kind can be used to weld small dense plate. The purpose is to keep the balance of main beam cover plate. The advantage of this technology is that has good manufacturing ability. Besides, main beam and end beam can weld automatically, thus will have a higher efficiency. While it also has shortage, because of welding, there are many welding line, which may cause big welding deformation of main beam.
Track way of partial rail box form in installed on the top of main pate of main beam. And the wheel pressure is on the main plate directly. Overhead crane structure of this form has a close depth-width ratio. The strength of main beam is higher than on track box girder, meanwhile inside of main beam leaves out small plate. So the welding deformation amount is small. Because the main beam is wide, it cannot wide a walking way on the side. So the top surface of main beam can play a walking way role.
Partial rail empty stomach box has the same structure as partial rail box. However, this girder structure adopts make holes on secondary plate. The reason why is that it can reduce the self-weight of bridge structure. In addition, it set electrical control system inside of main beam. Metallurgy overhead crane and foundry overhead crane use to use the design.
For the rest single girder main beam type, rail way of trolley set on one side of main beam, The other side weld an anti-roller way, when the rate loads is heavy, manufacturer will add an rail for anti-roller. This structure is not easy to check and main, except special environment need, it is not common.
Benefits of single girder overhead crane
High stability and design rigidity
- Torsionally rigid
- Optional rolled beam girder provides additional cost-savings
- Connections between the girder and end trucks are manufactured to precise machined tolerances for minimum wear
- End truck of torsionally rigid, welded box construction
- Excellent travel characteristics and minimum wear due to low-maintenance drives
- Travel wheels of highly wear-resistant spheroidal-graphite cast iron with self-lubricating properties
- Low deadweight reduces cost – crane girders made of computer-optimized box sections
- Rope hoist helps reduce operating cost due to extended 2m+ service life classification (1,900 hours of service at full load)
- Reliable monitoring and preventive maintenance due to advanced technology
Efficiency and performance
- Control pendant suspended for separate travel on the crane girder
- Power supply to the trolley via high-flexibility flat cable with protective ground conductor
- Optional radio control with display and proportional pushbuttons
- Modular design
- Contact us for additional options and customized system integration
Safety of overhead crane
Safety of overhead crane, in another word, it refers to the possibility that overhead crane equipment may cause damage to relevant property and people. When the safety device of overhead crane confirms to safety requirement, even if there is operation mistake, the destruction when problem happens will not be serious. During overload condition, the equipment will not be damage seriously.
Excellent overhead crane manufacturer products have safety coefficient, perfect control system and complete monitoring instrument. Besides, the device of fault monitoring and guidance are ready. Overhead cranes are always installed on top of walking people, and it concerns a lot, when using an overhead crane, the following points should pay attention to:
1. Double girder overhead crane trolley overall bounce off because of weightlessness.
2. Hanging overhead crane fall because of the broad gap of main beam and end beam.
3. Break of wire rope may lead to the fall of loads.
4. Loose of overhead crane parts may bounce off, which may hurt people.
5. Outdoor overhead crane may loosen because of heavy wind.
6. Upper limit out of control may cause hook break wire rope, then the loads will fall.
7. Hook device is not firm may cause the fall of heavy loads.
8. Fallen of single girder overhead crane.
All eight points above may cause loss of life and personal injury and significant damage to property. So the safety of overhead crane is key factor you should think first when buying an overhead crane.
Our company overhead crane is tested before send to you. Besides, all the overhead crane parts and the whole machine adopts high strength material. The overhead crane confirms to national standard of China, and some high level products follow the quality standard of FEM. Besides, you will get a one year warranty of your crane since you accept your crane.